Keywords
How to Cite
Abstract
The aim of the study was to compare the obtained data of hard dental tissues destruction indices with the corresponding indications for the choice of the method of treatment by means of mathematical analysis.
Materials & methods. 120 patients aged 20 to 55 were examined and 358 teeth hard tissue defects were identified in them. The data of indices was obtained and compared with the indications for orthopedic treatment according two indices in the same clinical situation.
Results. The study showed that the indices had different meanings and different indications for treatment in the same situations. Such discrepancies in indications for treatment indicate the subjective data of one of the indices, which does not take into account the depth of destruction and the volume of the remaining natural tissue of the teeth. Comparison of these indices showed different figures in the same clinical situation, identifying corresponding incorrect indications for the choice of the design of the first investigated index, as well as more accurate data of the proposed index.
Conclusion. The index assessment of hard dental tissues destruction serves as the main guideline for the dentist when choosing a method for tooth restoration, and can be calculated using photographs, scans and computer software.
References
References
Rozhko, M.M, Kinash, I.O. (2013). Indeksna ocinka stomatologichnogo statusu pacijentiv, jakym vygotovljaly sucil'nolyti kuksovi vkladky. Galyc'kyj likars'kyj visnyk, 20 (4), 52-54.
Morimoto, S, Rebello de Sampaio, F.B., Braga, M.M., Sesma, N., Özcan, M. (2016). Survival Rate of Resin and Ceramic Inlays, Onlays, and Overlays: A Systematic Review and Meta-analysis. J Dent Res, 95(9):985-94. doi: 10.1177/0022034516652848.
Fron Chabouis, H., Smail Faugeron, V., Attal, J.P. (2013). Clinical efficacy of composite versus ceramic inlays and onlays: a systematic review. Dent Mater. 29(12):1209–1218.
McLaren, E.A., Whiteman, Y.Y. (2010). Ceramics: rationale for material selection. Compend Contin Educ Dent. 31(9):666–668, 670, 672.
Tribst, J.P.M., Dal Piva, A.M.O., de Melo, R.M., Borges, A.L.S., Bottino M.A., Özcan M. (2019). Short communication: Influence of restorative material and cement on the stress distribution of posterior resin-bonded fixed dental prostheses: 3D finite element analysis. J Mech Behav Biomed Mater. 96:279-284. doi: 10.1016/j.jmbbm.2019.05.004.
Pavlenko O.V., Lystopad, O.P. (2014) Vybir metodyky vidnovlennja koronok pershyh moljariv (ogljad literatury). Sovrem. stomatologyja. 2: 100-103.
Morimoto, S, Albanesi, RB, Sesma, N, Agra, CM, Braga, MM. 2016. Main clinical outcomes of feldsphathic porcelain and glass-ceramic laminate veneers: a systematic review and meta-analysis of survival and complication rates. Int J Prosthodont. 29(1):38–49.
Fron Chabouis, H., Prot, C., Fonteneau, C., Nasr, K., Chabreron, O., Cazier, S., Attal, J.P. (2013). Efficacy of composite versus ceramic inlays and onlays: study protocol for the CECOIA randomized controlled trial. 14:278. doi: 10.1186/1745-6215-14-278.
Bul'buk, O.V. Rozhko, M.M. (2016). Optymizacija diagnostychnogo procesu pry ocinci velychyny defektiv tverdyh tkanyn zubiv pislja endodontychnogo likuvannja. Galyc. likar. visn. 23(4):7-9.
Yu, H.Y., Zhonghua Kou, Qiang Yi, Xue Za Zhi. (2020). Guided micro tooth preparation: from new strategies to new clinical practices.55(10):710-715. doi: 10.3760/cma.j.cn112144-20200627-00373.
Feitosa, S.A, Corazza, P.H., Cesar, P.F., Bottino, M.A, Valandro, L.F. (2014). Pressable feldspathic inlays in premolars: effect of cementation strategy and mechanical cycling on the adhesive bond between dentin and restoration. J Adhes Dent.16(2):147-54. doi: 10.3290/j.jad.a30555.
Brjanskaja, M.N., Ivanova, E.N. (2007). Sravnitel'naja harakteristika koncepcij preparirovanija karioznyh polostej v operativnoj stomatologii. Dal'nevostochnyj medicinskij zhurnal, (3), 122-126.
Mikljaeva, T.A. (2014). Opredelenie IROPZ s pomoshh'ju komp'juternyh tehnologij. Bjulleten' medicinskih internet-konferencij, 4 (5), 751.
Kl'omina V.V. (2006). Modyfikacija obchyslennja indeksu rujnuvannja okljuzijnoi' poverhni zuba (IROPZ) neprjamym metodom. Visn. stomatologii'. 1:83-88.
Flejsher, G.M. (2019) Indeksnaja ocenka v ortopedicheskoj stomatologii. Rukovodstvo dlja vrachej. Lipeck:Izdatel'skie reshenija.
Yanishen, I.V. Vidnovlennja defektiv tverdyh tkanyn zubiv vkladkamy za indeksnoju ocinkoju komp ́juternyh tehnologij. Ukrai'na (Kharkiv): HNMU.
Papadiochou, S., Pissiotis, A.L. (2018). Marginal adaptation and CAD-CAM technology: A systematic review of restorative material and fabrication techniques. The Journal of prosthetic dentistry, 119(4), 545–551. https://doi.org/10.1016/j.prosdent.2017.07.001.
Duret F. (1987). La CFAO dentaire. Description générale du projet [Computer-assisted design and construction of dental prosthetics. A general description of the project]. Le Journal dentaire du Quebec, 24, 30–36.
Del Curto, F., Saratti, C. M., Krejci, I. (2018). CAD/CAM-based chairside restorative technique with composite resin for full-mouth adhesive rehabilitation of excessively worn dentition. The international journal of esthetic dentistry, 13(1), 50–64.
Mangano, F., Gandolfi, A., Luongo, G., Logozzo, S. (2017). Intraoral scanners in dentistry: a review of the current literature. BMC oral health, 17(1), 149. https://doi.org/10.1186/s12903-017-0442-x
"Inter Collegas" is an open access journal: all articles are published in open access without an embargo period, under the terms of the CC BY-NC-SA (Creative Commons Attribution ‒ Noncommercial ‒ Share Alike) license; the content is available to all readers without registration from the moment of its publication. Electronic copies of the archive of journals are placed in the repositories of the KhNMU and V.I. Vernadsky National Library of Ukraine.